The AQUAtec DNA: 100 percent quality and safety

Highest standards, certification for all steps.

We leave nothing to chance where quality assurance and quality control are concerned. The highest standards, all necessary certifications and comprehensive checks are your guarantee of perfect results.

All steps and processes conform to the seven principles of quality management as defined by DIN EN ISO 9000. We are certified according to DIN EN ISO 9001:2015 and DIN EN ISO 14001.

We are equally committed to the all the latest standards, like DIN EN ISO 45001, when it comes to our employees’ health and safety.

Plan it - do it - check it - act! That’s the AQUAtec DNA!

  • ISO 90000

    Certificates

    THE SEAL OF APPROVAL: THE AQUATEC GUARANTEE OF QUALITY

    The highest standards of quality and safety are part of the AQUAtec DNA. They are documented in a series of certifications including:

    • DIN EN ISO 9001 (seit 2007)
    • DIN EN ISO 14001 (seit 2017)
    • DIN EN 1090 EXC 2 (seit 2014)
    • EN ISO 3834-2 (seit 2018)
    • DIN EN 10204 (seit 2020).

    For details and a full view of our certificates, please click the thumbnails.

  • Zertifikat DIN EN ISO 9001

    Certificate DIN EN ISO 9001

    Certificate Registration No. 01 100 071248

    Scope:

    • CNC machining and welding of aluminium, aluminium alloys, stainless steel, duplex steels
    • Waterjet cutting of aluminium, aluminium alloys, stainless steel, duplex steels, glass, plastics, rubber materials
    • Application consulting and project management

    Proof has been furnished by means of an audit that the requirements of ISO 9001:2015 are met.

    First certification: 2007
    Date of re-certification audit: 10.12.2019
    Last certification cycle expiration date: 07.12.2019
    Validity: The certificate is valid from 07.02.2020 until 07.12.2022.

  • Zertifikat DIN EN ISO 14001

    Certificate DIN EN ISO 14001

    Standard: ISO 14001:2015 Certificate Registration No. 01 104 071248

    Scope:

    • CNC machining and welding of aluminium, aluminium alloys, stainless steel, duplex steels
    • Waterjet cutting of aluminium, aluminium alloys, stainless steel, duplex steels, glass, plastics, rubber materials
    • Application consulting and project management

    Proof has been furnished by means of an audit that the requirements of ISO 14001:2015 are met.

    First certification: 2017
    Date of re-certification audit: 20.04.2020
    Last certification cycle expiration date: 11.04.2020
    Validity: The certificate is valid from 28.04.2020 until 11.04.2023.

  • Zertifikat DIN EN 1090 EXC 2

    Certificate DIN EN 1090 EXC 2

    Welding certificate TÜVRh-EN1090-2.00413.2019.005 in accordance with EN 1090-1, Table B.1 for welding steel structures as per DIN EN 1090-2

    Technical specification: EN 1090-2:2018
    Execution class: EXC2 nach EN 1090-2

    Welding process reference number according to DIN EN ISO 4063: 

    • Manual metal arc welding - 111
    • Metal active gas (MAG) welding using a solid wire electrode (semi-mechanical) - 135
    • Metal active gas (MAG) welding using a flux cored electrode - 136
    • Tungsten inert gas (TIG) arc welding -141
    • Drawn-arc stud welding with a ceramic ferrule or shielding gas - 783

    Material group: 

    • 1.1, 1.2 according to CEN ISO / TR 15608 and EN 1090-2, Tables 2 and 3
    • 10, 8 according to CEN ISO / TR 15608 and EN 1090-2, Table 4

    Start of validity: 10.03.2014
    Period of validity: 09.03.2023

  • Zertifikat WPK

    Certificate EN ISO 3834-2

    Quality assurance in welding operations according to ISO 3834

    Product category:

    • Manufacture of pressure equipment or components for pressure equipment.
    • Manufacture of steel structures or components for steel structures.

    Welding processes according to ISO 4063: 

    • Manual metal arc welding - 111
    • Metal active gas (MAG) welding - 135
    • Metal active gas (MAG) welding using a flux cored electrode - 136
    • Tungsten inert gas (TIG) arc welding - 141
    • Drawn-arc stud welding - 783

    Material groups according to CEN ISO / TR 15808: 1.1, 1.2, 8.1

    Date of first certificate: 18.06.2018
    End of validity: 17.06.2021

  • Zertifikat WPK

    Certificate EN ISO 10204 - 2.1, 2.2 or 3.1

    System for transferring material markings

    Certificate number: 01 202 640/U-13 0015

    Scope:

    • Transfer of metallic material markings (re-stamping) with inspection certificates according to DIN EN 10204- 2.1, 2.2 or 3.1

    Standard taken as a basis:

    • Directive 2014/68/EU, Annex I, Chapter 3.1.5, EN 764-5 HP0, paragraph 4

    Date of first certificate: 27.11.2020
    End of validity: 18.12.2023

     

  • Certificates
  • Certificate DIN EN ISO 9001
  • Certificate DIN EN ISO 14001
  • Certificate DIN EN 1090 EXC 2
  • Certificate EN ISO 3834-2
  • Certificate EN ISO 10204 - 2.1, 2.2 or 3.1

EVERY STEP OF THE WAY

QUALITY ASSURANCE STANDARDS AND MEASURES

We observe the agreed standards and measures for quality assurance strictly and without compromise: from the feasibility study after we receive your project enquiry through the selection of the most appropriate manufacturing strategies to resource management.

We keep an eye on the needs of all project stakeholders throughout. That way, we create certainty and trust for everyone involved and ensure that each step delivers the best possible outcomes.

Our aim at the end of the day: workpieces or assemblies that meet all your requirements to your utmost satisfaction, exactly as agreed. That’s the AQUAtec principle and our number one goal in everything we do.

QUALITY IS NOT A FINITE PROCESS

CONTINUOUS LEARNING TO HELP US BECOME EVEN BETTER.

When it comes to quality, enough is never enough for us.

The desire to continuously improve all employees, processes, strategies and measures takes priority in everything we do.

We work tirelessly and uncompromisingly – not simply to enable your success but to make it shine a little bit brighter every day.

That’s why we set great store by ongoing training for ourselves and our specialists.

  • Aquatec 3D Vermessung
  • Aquatec 3D Vermessung

3D MEASUREMENT

LIVING UP TO THE HIGHEST EXPECTATIONS

With AQUAtec, you profit from a standard of quality assurance that lives up to even the highest expectations in the engineering industry.

Prior to shipping your workpieces, we measure every single one on our 3D CNC coordinate measuring machine, a Wenzel LH 1210. All shape and position tolerances are determined exactly and documented.

Even freeform surfaces can be measured absolutely precisely. The machine is rated for workpieces weighing up to 3.25 tons.

Our state-of-the-art system significantly increases the manufacturing options for five-axis machining.

Having said that, thanks to our dedicated test and measurement reports, your receiving department is always on the safe side.

TRANSPORT & LOGISTICS

SAFE, PUNCTUAL AND COMPLIANT

With our fleet and our forwarding agents of many years’ standing, you can rest assured that your components will arrive punctually and safely wherever they’re needed anywhere in the world.

We make sure the goods are always packed and loaded safely, and these checks are additionally designed to conform to all applicable statutory regulations.

That way, we guarantee a smooth flow of goods and the integrity of your components.

Aquatec Line

Certificates

  • DIN EN ISO 9001
  • DIN EN ISO 14001
  • DIN EN 1090 EXC 2
  • DIN EN ISO 3834-2
  • DIN EN ISO 10204 -2.1, 2.2 oder 3.1

Contact Us

AQUAtec Master in Metal GmbH
Lise-Meitner-Str. 9
46446 Emmerich am Rhein
Ust.-ID DE 31 4840 966
DUNS-Nr. 31-453-6765